If that’s the case, you still have a lot of various Video Editing Software solutions to check out. Wondershare DemoCreator might not always fit your business requirements or unique circumstances of your sector. It's an ideal partner to the Raspberry Pi Pico and has countless uses.What are alternatives to Wondershare DemoCreator? This comes highly recommended, and since our video we have used our Maker Pi Pico in so many prototypes. The version which includes the Raspberry Pi Pico comes with Circuity Python Firmware preloaded and demo code on there to showcase its lights and sound. This really is cheap as chips, you could pick one up for around $10US at the time of writing. It's on our list to test as it would be extremely useful. We didn't get chance to test this out in the video and still haven't but for those that invest the time you can add Wi-Fi connectivity to your RP2040 projects. Really handy to be able to get data on and off the device if you are in the field. We didn't get chance to test this SPI SD card reader in the video but have since managed to read and write to it. You can get Grove to jumper wire headers and Grove to I2C Quicc adapter cables. They sure look handy though, in the meantime our jumper wires are more than sufficient. We don't have any components as yet that use these grove connectors so haven't used them. There are 3 buttons on the board, this would be enough for the majority of our projects. We've always thought the Raspberry Pi Pico was missing a reset button and were happy to find a labelled run button on this nifty board. There is a switch so you can turn the speaker off if you are putting audio through GPIO Pin 18 and only want the signal routed to the audio socket. We've had to solder many audio sockets so it's great to have one onboard here. We have a buzzer which is more than just a buzzer more of a mini speaker connected to GPIO Pin 18.Ī 3.5mm audio socket is connected to GPIO Pin 18 and 19 (left and right). There is a WS2812 Neopixel RGB LED at the top right nicely labelled and hooked up to GPIO Pin 28. You can disable the GPIO LEDs by scratching the solder off the back of the board. The GPIO pins have blue LED lights which are on/off depending on the status of the pin it represents. The first thing you notice is the clear labelling, everything you could possibly want is there back and front. So a good choice for beginners or as a gift. The version with the board comes with some code already preloaded and it's ready to go right from the off. There are great reasons for both, it would be useful to be able to add and remove the board which you could do with the Maker Pi Pico Base and it's cheaper. We received the version with the board already on. There are 2 versions, one with the raspberry pi pico RP2040 board included and one without. Thanks to Siaw Lim for sending us one out. We'd never publish a bad review of a gift someone sent, we just wouldn't put up a review at all in that case.Īnyway they were with good reason confident we'd love the Maker Pi Pico and we did. We didn't have to review it, there was no time limit, and we could say what we liked even if we didn't like it. We do get a lot of offers but this one stood out with no strings attached. We usually buy the devices we review, this was the first review we have done for an item we didn't pay for ourselves. We take a look and give you a demo of all its onboard features. If you purchase the board with the Pico included it comes preloaded with CircuitPython ready for you to hack around with. Maker Pi Pico has everything you may need for a Raspberry Pi Pico project on one board to get you started especially if you are new to Raspberry Pi Pico’s.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |